Mold categories and classification method

A lot of mold classification method, used are: according to the classification of the mold structure, such as a single die, compound die; classification by using the object, such as a car cover mold, mold and other motor; according to the classification of materials, such as mold metal products, non metal mould; manufacturing materials according to the classification of mold, such as hard alloy die; according to the classification of properties, such as drawing, powder metallurgy die, die etc.. These classification methods, some are not fully reflect the characteristics of all kinds of mould and forming process, and their use function. Therefore, the comprehensive classification method to use the mold process properties and use objects forming primarily, the mold is divided into ten categories, see Table 1 in each kind of mold, but also according to the mould structure, material, function and use of mould method is divided into several small kinds or breeds. Mold related English tooling mold quotation mold base
Serial number
Die types
Mold species
The forming process property and use objects
1
Stamping die (Chong Mo)
Blanking die (no, less waste punching, trimming, smooth blanking, deep hole punching precision die and so on), the bending die, drawing die, single operation die (blanking, bending, deep drawing, forming and so on), compound die, progressive die; a die, automobile covering combined die, motor silicon steel sheet die
Sheet metal stamping
2
Plastic mold
Compression mold, extrusion mold, injection mold (vertical type, type, angle type injection mould); thermosetting plastic injection mold, extrusion mold (Guan Cai, film flat nose etc.) the foaming mold, low tooling foam injection molding, blow molding mould
Plastic molding and technology of Huangyan (thermosetting and thermoplastic plastics)
3
Die casting die
For die casting mould hot chamber die casting machine, die casting mold of vertical cold chamber die casting machine, die casting, using cold chamber die casting machine, die casting mold all vertical die casting machine, non-ferrous metals (zinc, aluminum, copper, Mei Hejin black) die casting, metal die-casting mold
Casting non-ferrous metal and ferrous metal pressure forming process
4
Die forging
Die forging press forging die and large, spiral press forging die, horizontal forging machine forging, roll forging; cold heading die, all kinds of fasteners extrusion die, drawing die, die by liquid forging
Metal forming, forging, extrusion by
5
Metal mould casting
Metal model using various metal parts casting
Metal casting forming technology
6
Powder metallurgy die
Forming die; manual mode: Press, entity entity one-way two-way pressing manual mode; solid floating die; maneuvering mode: large section entity floating die, pole single die, a one-way, two-way die, a floating die; plastic mold; manual mode; radial plastic mould, with outer step a full plastic mould, plastic mould and so on the ball surface.
Maneuvering mode: no step entity automatic sizing die, sleeve rod type automatic plastic buns, shaft sleeve through the automatic sizing die sleeve full plastic automatic mode, with outer step with spherical sleeve full plastic automatic mode etc.
Suppression of pressing powder molding Arts Huangyan. The main mold processing equipment for Cu, Fe based powder products; mechanical parts, tools, materials and products easy to heat parts etc.
7
Glass mold
A wind blowing molding method and mold, blow forming and die pressure, die glassware
The forming process of glass products
8
Rubber mould
Rubber products, rubber mold pressing, extruding mould, injection mould. Rubber tire mold, "O" shaped rubber sealing ring die etc.
Rubber pressing forming process
9
Ceramic mold
Forming metal mould various ceramic utensils and other products with
The forming process of ceramic products
10
Economic die (die)
Low melting point alloy sheet die forming die, die, lamination, silicon rubber mold, epoxy resin mold, ceramic mold casting mould, laminated cavity plastic mold, fast electroformed mold etc.
Suitable for multi variety and small batch products mold, has high economic value